Effects of Variation of Differential Gain and Injection Current on the Performance Characteristics of the Designed 405 nm MQW Violet Laser

Autores/as

  • Farhan Ahmed Chowdhury Department of Electrical and Electronic Engineering, American International University-Bangladesh (AIUB), Banani, Dhaka-1213, Bangladesh
  • Rinku Basak

Palabras clave:

Differential Gain, Injection Current, Output Power, Resonance Frequency, Modulation Bandwidth, MQW Violet Laser

Resumen

In this work the Designing and Performance Analysis of a 405 nm InGaN based multi quantum well (MQW) Violet Laser have been presented. The internal designing of 405nm Violet Laser has been done with appropriate calculation. The desired wavelength of 405nm was obtained by adjusting the exact concentration of In0.0979Ga0.9021N /Al0.07Ga0.93N. The effects on Rate Equations by varying the differential gain and Injection current have been observed. Also the optimization of the Performance Parameters for Maximum Output Power and Modulation response are presented here. For the desired wavelength of 405 nm with Injection current of 120 mA, Threshold Current of 8.7 mA and differential gain of 4×10-16 cm2 the output power has obtained 228.5 mW. For better Performance of Violet Laser Differential Quantum Efficiency has been calculated 67.02%. A key feature of this work is the extensive use of MATLAB. All modification of the designs, comparisons and performance analysis were proposed in this work by using MATLAB. All the simulations, optimization, calculation have been done in room temperature of 300 K.Keywords: Differential Gain; Injection Current; Output Power; Resonance Frequency; Modulation Bandwidth; MQW Violet Laser

Descargas

Publicado

2014-04-18

Número

Vol. 4 Núm. 1 (2014)

Sección

Research Articles

Licencia

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.