Performance Analysis and Optimization of a 1550 nm MQW VCSEL by Varying Differential Gain and Injection Current

Autoři

  • Rashel Kabir Department of Electrical and Electronic Engineering, American International University-Bangladesh (AIUB), Banani, Dhaka, Bangladesh
  • Rinku Basak

Klíčová slova:

VCSEL, MQW, relative response, differential gain

Abstrakt

In this work, the performance characteristics of a 1550 nm top emitting multi quantum well (MQW) vertical cavity surface emitting laser (VCSEL) using AlGaInAs/InP are presented. Using this material the peak material gain is obtained as 1652.3 cm-1. A high performance designed VCSEL is obtained with the optimized value of differential gain and injection current. The optical output power of 31.37 dBm and the resonance frequency of 2.5 GHz are obtained at 6.1 mA of injection current and 1×10-16 cm2 of differential gain. Further by varying the injection current and differential gain up to 12 mA and 5×10-16 cm2, respectively a maximum resonance frequency of 7.7 GHz and the corresponding modulation bandwidth of 11.96 GHz are obtained which makes the laser capable for transmitting data at high speed through optical fiber.

Biografie autora

  • Rashel Kabir, Department of Electrical and Electronic Engineering, American International University-Bangladesh (AIUB), Banani, Dhaka, Bangladesh
    Lecturer,The Peoples University of Bangladesh.

Stažení

Publikováno

2013-12-17

Číslo

Vol 3 No 3 (2013)

Sekce

Research Articles

Licence

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.