Effect of Notching on the Return loss of T-shaped Microstrip Patch Antenna for Wireless Communication System
Abstract
With the loading of a pair of notches, a T-shaped slot and a pair of rectangular slots, novel bandwidth enhancement of microstrip antenna is demonstrated. The design is fed through a single coaxial probe. The proposed antenna is a modification of a simple T-shaped antenna which provides good radiating characteristics with enhanced bandwidth. The proposed antenna covers the S band and is used for many wireless applications. The proposed antenna is designed to cover a wide band of frequency spectrum. The antenna is designed on a ground plane of 38.41×46.83 and a patch of 28.81×37.23. The designed antenna achieves a simulated bandwidth of 57.02 below -10 dB level. The proposed antenna is simple to design with simple structure and with low fabrication cost. Details of the antenna design and experimental results are presented and discussed. Keywords: Microstrip patch antenna, line feeding, S Band, mobile communications
Downloads
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. _______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |
