An Analysis of Optical Transmission System using Fiber Bragg Grating (FBG) with Power Optimization and Dispersion Compensation

Autori

  • T. Sriram Prasanth Electronics and Communication Department, VIT University, Vellore, Tamil Nadu, India
  • B. Rajesh Electronics and Communication Department, VIT University, Vellore, Tamil Nadu, India
  • G. Aarthi Electronics and Communication Department, VIT University, Vellore, Tamil Nadu, India

Parole chiave:

Dispersion- compensating fiber (DCF), Erbium Doped Fiber Amplifier (EDFA), Wavelength-Division Multiplexing (WDM), Dispersion Compensation (DC), Power Optimization (PO)

Abstract

The Fiber Bragg Grating (FBG) is a low cost filter for wavelength selection and also has low insertion loss. We know that Dispersion Compensation (DC) and Power Optimization (PO) are one of the most important parameters of the optical communication system. In this proposed communication model, dispersion compensation has been achieved and also we optimized almost same power at the receiver end, also we have calculated output power for different values of fiber length for a given input power. FBG is set at 193.1 THz frequency (near to 1550 nm Bragg Wavelength). At input side the bit sequence generator, Gaussian pulse generator and Mach-Zehnder modulator (MZM) is used. Measurement of power is done by Optical power Meter (OPM) and dispersion is analyzed by optical time domain visualizer (OTDV).Keywords: Dispersion- compensating fiber (DCF), Erbium Doped Fiber Amplifier (EDFA), Wavelength-Division Multiplexing (WDM), Dispersion Compensation (DC), Power Optimization (PO) Cite this Article Sriram Prasanth T, Rajesh B, Aarthi G. An Analysis of Optical Transmission System using Fiber Bragg Grating (FBG) with Power Optimization and Dispersion Compensation. Trends in Opto-electro & Optical Communication. 2015; 5(2): 1–5p.

Dowloads

Pubblicato

2015-06-11

Fascicolo

V. 5 N. 2 (2015)

Sezione

Research Articles

Licenza

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.