A Review on Unfilling Defect Found in Hot Forged 42CrMo4 Connecting Rod

Авторы

  • Lakhan Thakkar
  • Hardik Chauhan Department of Mechanical Engineering, Atmiya Institute of Technology and Science, Rajkot, Gujarat, India
  • Manoj Sheladiya Department of Mechanical Engineering, Atmiya Institute of Technology and Science, Rajkot, Gujarat, India

Ключевые слова:

Forging, forging defect, unfilling, simulation, DEFORM 3D

Аннотация

The objective of this paper is to study hot forging process on connecting rod and also find the causes as well as remedies for those defects. This review paper emphasizes on finding thecause and effect of various defects found in connecting rod manufactured by hot forging from 42CrMo4 material. Connecting rod is one of the most important component s in automobile. But, various defects are seen in that component part , especially unfilling, mismatch and surface cracks. So, cause and effect diagram is prepared so as to improve the quality and reduce rejection rate.Cite this Article. Lakhan Thakkar, Hardik Chauhan,Manoj Sheladiya. A Review on Unfilling Defect Found in Hot Forged 42CrMo4 Connecting Rod. Trends in Mechanical Engineering & Technology. 2017; 7(1): 26–32p.

Загрузки

Опубликован

2017-02-28

Выпуск

Том 7 № 1 (2017)

Раздел

Review Articles

Лицензия

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.