Analysis and Characterization of Tensile Property of Mg MMC using ANSYS

Авторы

  • C. Tarasasanka Department of Mechanical Engineering, R.V.R & J.C. College of Engineering, Guntur, Andhra Pradesh, India
  • K. Ravindra Department of Mechanical Engineering, R.V.R & J.C. College of Engineering, Guntur, Andhra Pradesh, India

Ключевые слова:

Mg MMC, FEA, tensile strength

Аннотация

The objective of the this research paper is to predict the stress and strain values of magnesium metal matrix composites using finite element analysis (FEA) and compare with the universal testing machine (UTM) results through the tensile load. The composites were prepared by semi solid stir casting process. Tensile specimens with ASTM B557 standard dimensions were prepared from the composites. These specimens were subjected to uni-axial tension under the 10 t capacity UTM. The specimen’s FEA models were created using ANSYS 16 and the stress strain values were obtained. The actual results were compared with the predicted values obtained from the FEA. It was ensured that the FEA results had well agreement with the original deformation length with in the acceptable error margin.Cite this ArticleTarasasanka C, Ravindra K. Analysisand Characterization of Tensile Propertyof Mg MMC using ANSYS. Trends inMechanical Engineering & Technology. 2017; 7(1): 1–5p.

Биография автора

  • C. Tarasasanka, Department of Mechanical Engineering, R.V.R & J.C. College of Engineering, Guntur, Andhra Pradesh, India
    Assistant Professor, Department of Mechanical Engineering

Загрузки

Опубликован

2017-02-07

Выпуск

Том 7 № 1 (2017)

Раздел

Research Articles

Лицензия

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.