Minimizing the Sand Casting Defects Using Taguchi Method

Авторы

  • Priyank V. Parekh Department of Mechanical Engineering, R.K. University, Rajkot, Gujarat, India Shantilal Shah Government Engineering College, Bhavnagar, Gujarat, India
  • J.A. Vadher Department of Mechanical Engineering, Government Engineering College, Palanpur, Gujarat, India

Ключевые слова:

Casting defects, blow holes, porosity, orthogonal array, S/N ratio

Аннотация

The global market is becoming more and more quality conscious now a days. This Research work includes minimization of sand casting defects in C.I. based foundry. The survey was carried in small scale CI based foundry (Surat). Major defects were observed are misrun, coldshut, blowholes, and porosity. Taguchi method is used to optimize the control parameters like moisture, permeability, pouring time, pouring temperature. L18 orthogonal array is used in this research work. Critical parameters are optimized using Signal to noise Ratio (S/N Ratio). Cite this Article  Priyank V Parekh, Vadher JA. Minimizing the Sand Casting Defects Using Taguchi Method. Trends in Mechanical Engineering & Technology. 2016; 6(3): 14–17p

Загрузки

Опубликован

2016-11-10

Выпуск

Том 6 № 3 (2016)

Раздел

Research Articles

Лицензия

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.