Influence of Cutting Speed and Tool Angles on Tool Forces in Turning of Steel Reinforced Polymer Composites
Аннотация
Turning of steel fiber reinforced polymer composites is quite different compared to machining of conventional metals and alloys. Hence an experimental investigation on orthogonal turning was carried out in an effort to analyze the variation in cutting force and thrust force for different cutting speeds, depth of cuts and tool rake and relief angles using HSS tool. The cutting and thrust force values were found to be decreasing with the increase in cutting speed and also with the increase of rake and relief angles. Results also indicated that with the increase in depth of cut, the tool forces increased for any combination of tool angles and cutting speed.Keywords: Polymer composites, steel fiber, cutting and thrust force, tool angles and cutting speed
Опубликован
Выпуск
Раздел
Лицензия
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. _______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |
