Hybridizing Principle of TOPSIS with Regression Metamodel Approach for the Optimization of CNC-WEDM Process Parameters

Autores

  • Sandeep Tyagi Department of Mechanical Engineering, Madhav Institute of Technology and Science, Gwalior, Madhya Pradesh, India
  • Manoj Kumar Gau Department of Mechanical Engineering, Madhav Institute of Technology and Science, Gwalior, Madhya Pradesh, India
  • Dinesh Kumar Kasdekar Department of Mechanical Engineering, Madhav Institute of Technology and Science, Gwalior, Madhya Pradesh, India

Palavras-chave:

CNC-WEDM, TOPSIS, DOE

Resumo

Experiment is conducted on a Computer Numerical Control wire electric discharge machine under different conditions of process parameters. The experiment is carried out by using Aluminum Alloy AA6061 as a work material and a Brass wire as a cutting tool in CNCWEDM. This paper aims to develop a combination of DOE and Entropy based TOPSIS to solve multi response parameter optimization problems. An experimental investigation was carried out based on DOE to analyses, the sensitivity of CNC-WEDM attributes to the variations in process parameters such as Servo-voltage (SV), Wire-feed(WF), pulse on time(POT), pulse off time (POF). The most desirable factor level combinations were selected using DOE. The model developed in this study can be used as a systematic framework for process parameter optimization in conscious manufacturing process.Cite this Article Sandeep Tyagi, Manoj Kumar Gaur, Dinesh Kumar Kasdekar. Hybridizing Principle of TOPSIS with Regression Meta-model Approach for the Optimization of CNC-WEDM Process Parameters. Trends in Mechanical Engineering & Technology. 2016; 6(3): 18–25p. 

Biografia do Autor

  • Sandeep Tyagi, Department of Mechanical Engineering, Madhav Institute of Technology and Science, Gwalior, Madhya Pradesh, India
    mechanical departmentresearch scholar

Downloads

Publicado

2016-12-26

Edição

Vol. 6 N.º 3 (2016)

Secção

Research Articles

Licença

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.