Evaluation of Test Performed on Suspension by the Use of ZnO as Blending Agent for Measurement of Mechanical Characteristics

著者

  • Akhil Dineshbhai Chhaniyara undergraduate student B.E Mechanical G.K. BHARAD INSTITUTE OF ENGINEERING - RAJKOT GUJARAT TECHNOLOGICAL UNIVERSITY (GTU)
  • Meet Kansara Gujarat Technological University (G.T.U), Ahmedabad, India

キーワード:

ZnO、 blending agent、 dynamic load test rig、 suspension unit、 mechanical properties.

要旨

This paper entails about the analogy performed on the rear unit-spring loaded hydraulic damper. The focus is laid upon the measurement of mechanical properties when the suspension unit is preloaded. Dynamic load test rig is employed for the accurate and precise measurement of values generated during the test. The suspension unit is preloaded with some initial velocity and the corresponding values are being generated. ZnO as a blending agent along with the damping fluid will help to improve the shock absorbing capacity. The mechanical parameters for the characterization considered are velocity, acceleration and force values with respect to peak and average values. For these corresponding values the graphs are generated respectively with the help of Pro-Damp software. For the successful interpretation of all the values and graphs, suspension unit of Honda Bike is taken into consideration.Cite this ArticleAkhil Chhaniyara, Meet Kansara. Evaluation of Test Performed on Suspension by the use of ZnO as blending agent for measurement of mechanical characteristics. Trends in Mechanical Engineering & Technology. 2015; 5(3): 33–37p.

著者略歴

  • Akhil Dineshbhai Chhaniyara、 undergraduate student B.E Mechanical G.K. BHARAD INSTITUTE OF ENGINEERING - RAJKOT GUJARAT TECHNOLOGICAL UNIVERSITY (GTU)
    DEPARTMENT OF MECHANICAL ENGINEERING

ダウンロード

発行日

2015-11-23

巻号

巻 5 号 3 (2015)

セクション

Research Articles

ライセンス

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.