Optimizing Die Corner Radius of Deep Drawing Die

Autores/as

  • Kondapalli Siva Prasad ASSOCIATE PROFESSOR, DEPARTMENT OF MECHANICAL ENGINEERING, ANIL NEERUKONDA INSTITUTE OF TECHNOLOGY & SCIENCES, VISAKHAPATNAM, INDIA
  • Chalamalasetti Srinivasa Rao PROFESSOR, DEPARTMENT OF MECHANICAL ENGINEERING, AU COLLEGE OF ENGINEERING, ANDHRA UNIVERSITY, VISAKHAPATNAM, INDIA

Palabras clave:

Deep Drawing, Corner radius, stainless steel, ANSYS.

Resumen

The process of deep drawing plays a vital role in the production process of different parts in various process environments. Even though there is lot of variations in the production of parts during deep drawing with conventional processes to the latest automations in the manufacturing. There is a need to develop different die designs by varying input processes parameters for the deep drawing process in an optimum manner. The objective of the present study is to determine the influencing of die corner radius in deep drawing process and analyzing the process by varying the die corner radius. As the die corner radius plays a vital role in manufacturing the product in deep drawing process. Lower the die corner radii the part is subjected to tearing effect and higher the die corner radii, wrinkling is observed. The present work deals with the different die corner radii for stainless steel blank. Static analysis and transient analysis is carried out in ANSYS for (4, 5, 6, 7, and 8 mm) corner radii of the die.  Keywords: Deep drawing, corner radius, stainless steel, ANSYS

Biografía del autor/a

  • Chalamalasetti Srinivasa Rao, PROFESSOR, DEPARTMENT OF MECHANICAL ENGINEERING, AU COLLEGE OF ENGINEERING, ANDHRA UNIVERSITY, VISAKHAPATNAM, INDIA
     

Descargas

Publicado

2014-09-04

Número

Vol. 4 Núm. 2 (2014)

Sección

Research Articles

Licencia

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.