Analysis of Nonlinear Dynamic Model of Ball Bearing with Effect of Internal Radial Clearance
Palabras clave:
nonlinear dynamics, rolling bearing, ball passage frequency, internal radial clearanceResumen
It is a critical process to determine the response of rolling element bearing vibration using dynamic behavior analysis. Rolling element bearing works on the principal of transmission of load from moving race to stationary race. Generally outer race is fixed and load transmission takes place from inner race to outer race. In rolling bearing analytical formulation, the contact between rolling element and raceways is considered as nonlinear springs and their stiffness are obtained by using Hertzian elastic contact deformation theory. The implicit type numerical integration technique is used to solve the nonlinear differential equations iteratively. This paper presents the effect of internal radial clearance on rolling element bearing vibrations. Out of four fundamental bearing frequencies, ball passage frequency is predominant to show the effect of vibration. Ball passage frequencies are found to be reduced considerably, if the bearing internal radial clearance is selected as per the recommended value.
Publicado
Número
Sección
Licencia
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. _______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |
