Analysis of Process Parameters Used in Plasma Cutting Machine: A Review

Autor/innen

  • Kamal H. Trivedi Department of Mechanical Engineering, VVP Engineering College, Rajkot, Gujarat, India
  • Dipesh D. Kundaliya Department of Mechanical Engineering, VVP Engineering College, Rajkot, Gujarat, India

Schlagwörter:

Plasma arc cutting, cutting process parameters

Abstract

In most recent forty years, there has been gigantic research in machining and advancement in innovation. With increment in rivalry in advertise and to accomplish high precision now days, the nonconventional machining has moved toward becoming help of any industry. A standout amongst the most vital non-regular machining techniques is plasma bend machining. Its high precision, completing, capacity of machining any hard material, and to deliver multifaceted shape, increment its request in advertise. In this review paper we presented the work on parametric optimization of plasma arc cutting machine. In request to achieve target and ideal outcomes, Taguchi strategy is utilized as a part of the investigation of this paper. The proper orthogonal cluster has been chosen according to number of elements and the levels to perform least experimentation. The work bits of stainless steel materials were utilized for try reason. The ideal esteem has been resolved with the assistance of principle impact plot and ANOVA table for consider reason. The relapse condition for MRR and surface harshness (Ra) has been produced with the assistance of Minitab 15 Programming which is utilized as a part of paper. Affirmation tests have been done to affirm the esteem assessed through the product..The confirmation for MRR run was done by using the setting of different parameters like gas pressure, current flow rate, cutting speed and arc gap. Results are provided to confirm the effectiveness of this approach. After the confirmation, the MRR value error within 10% was allowed.Cite this ArticleTrivedi Kamal H, Kundaliya Dipesh D. Analysis of Process Parameters Used in Plasma Cutting Machine: A Review. Trends in Mechanical Engineering & Technology. 2017; 7(2): 18–21p.

Downloads

Veröffentlicht

2017-07-12

Ausgabe

Bd. 7 Nr. 2 (2017)

Rubrik

Review Articles

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.