A Review: Effect of Different Shielding Gas on Weld Penetration in Stainless Steel in GTAW Process

Forfattere

  • Ashish Harshadbhai Pandya
  • G.D. Acharya Department of Production Engineering, Atmiya Institute of Technology, Rajkot, Gujarat, India

Nøgleord:

Depth of penetration, GTAW, mechanical properties, parametric effect, weld bead geometry

Resumé

Gas tungsten arc welding (GTAW) is high quality and high precision welding process which is suitable for welding thin metals. Inert gases as helium and argon, carbon dioxide and nitrogen are used as a shielding gas to prevent the weld bead from air, dust and other contaminations in welding. There are so many welding process parameters which affect the weld quality in GTAW. Important process parameters which mainly affect the weld quality are welding current, arc voltage, welding speed, gas flow rate, heat input, and specimen thickness. Bead geometry is an important parameter for GTAW process. Depth of penetration is main requirement in this paper, and how to increase the depth of penetration is the key feature for this work.Cite this ArticlePandya A, Acharya GD. A Review:Effect of Different Shielding Gas onWeld Penetration in Stainless Steel inGTAW Process. Trends in MechanicalEngineering & Technology. 2017; 7(1):13–18p.

Downloads

Publiceret

2017-03-06

Nummer

Årg. 7 Nr. 1 (2017)

Sektion

Review Articles

Licens

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.