A Review on Effect of EDM Parametrs on Die Sinking EDM

Authors

  • Jyoti Bhaghi
  • Manjeet Bohat Mechanical Engineering Department, U.I.E.T/Kurukshetra University, Kurukshetra
  • V. P. S. Kalsi Head-Metrology Division, CSIR-CSIO, Chandigarh, India
  • Sunil Dhingra Mechanical Engineering Department, U.I.E.T/Kurukshetra University, Kurukshetra

Keywords:

Keywords, electric discharge machining, metal removal rate, tool wear rate, radial over cut

Abstract

Electric discharge machining (EDM) is a nonconventional method of machining conductive and hard to machine materials and obtaining intricate shapes. It is a controlled method of melting and vaporizing the work piece by series of electric discharges between the tool and the work piece. In EDM there are a number of process parameters which must be selected sophisticatedly for obtaining reliable products thus optimization of EDM process parameters is important. This review paper studies the major research in die sinking EDM related to the effect of various EDM operation variables on metal removal rate (MRR), tool wear rate (TWR), surface roughness (SR) and radial over cut (ROC). Keywords: electric discharge machining, metal removal rate, tool wear rate, radial over cut Cite this Article Jyoti, Bohat M, Kalsi VPS, Dhingra S. A Review on Effect of EDM Parameters on Die Sinking EDM. Trends in Mechanical Engineering and Technology. 2015; 5(1): 26–30p.

Downloads

Published

2015-04-08

Issue

Vol. 5 No. 1 (2015)

Section

Review Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.