Composite Specimens Thermomechanical Analysis Using Infrared Thermography

Authors

  • Bakhtiyar Hashmi
  • Kunal J. Raut Department of Mechanical Engineering, Rajarambapu Institute of Technology, Sangli, Maharashtra, India

Keywords:

Composite material, E-glass epoxy, thermomechanical, infrared thermography, NDT

Abstract

The use of composites for engineering components has increased significantly. The introduction of composite components can reduce weight and has the potential to reduce the through life cost of the component. Their overall performance is influenced by the constituent materials, their distribution and the interaction between them. To exploit the potential of composite material, it is important to understand the thermomechanical behavior. Therefore, this work is about thermoelastic response from composite specimens loaded on Universal Testing Machine and Infrared Thermal camera is used at room temperature for extracting quantitative full-field stress data from the thermal measurements.Keywords: Composite material, E-glass epoxy, thermomechanical, infrared thermography, NDTCite this ArticleBakhtiyar F. Hashmi, Kunal J. Raut. Composite Specimens Thermomechanical Analysis using Infrared Thermography. Trends in Mechanical Engineering & Technology (TMET). 2015; 6(2): 1–6p.

Downloads

Published

2015-05-14

Issue

Vol. 5 No. 2 (2015)

Section

Research Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.