Additives and EGR Process for the Exhaust Gases in Compression Ignition Engine

Autoři

  • Binyamin Christian M.E Student, Dept. Thermal in Mechanical Engineering, LDRP – ITR, Gandhinagar.
  • A R Patel Professor and Head, Dept. of Mechanical Engineering, LDRP – ITR, Gandhinagar.

Klíčová slova:

Additives, EGR, Emissions, Combustion, Diesel engine

Abstrakt

Exhaust gases is the most prompt topic in current situation. Exhaust gases badly affect the environment, human and other living organism so, controlling of exhaust gases is very essential. Today automobile vehicles particularly diesel engine vehicles emit more exhaust gases, so for the controlling of exhaust gases we can use additives in fuel and EGR process together. When the additives are mixed with fuel, a cylinder pressure decreases and ignition delay and combustion duration becomes shorter and emission of smoke, HC and CO is reduced. However, the NOx emission has little effect, so for the NOx reduction we can use EGR process in which we can induce some percentage of exhaust gases in cylinder and can keep the cylinder temperature low. This can help to reduce the NOx reduction because as the cylinder temperature goes lower, the NOx emission is lower and by the combination like additives and EGR process, we can reduce the exhaust gases.Keywords: Additives, EGR, emissions, combustion, diesel engine

Biografie autora

  • Binyamin Christian, M.E Student, Dept. Thermal in Mechanical Engineering, LDRP – ITR, Gandhinagar.
    M.E StudentDept. Thermal in Mechanical Engineering, LDRP – ITR,Gandhinagar.
  • A R Patel, Professor and Head, Dept. of Mechanical Engineering, LDRP – ITR, Gandhinagar.
    Professor and Head, Dept. of Mechanical Engineering, LDRP – ITR, Gandhinagar.

Stažení

Publikováno

2014-04-28

Číslo

Vol 4 No 1 (2014)

Sekce

Review Articles

Licence

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.