A Study of Cycloconverter Gating Sequence and Control Strategy for Various Conversion Topology

Autores/as

  • Jahid Khan Tuhin Department of Electrical and Electronic Engineering, Leading University, Sylhet, Bangladesh
  • Md. Foyez Ahmed Department of Electrical and Electronic Engineering, Leading University, Sylhet, Bangladesh
  • Tahmid Shahriar Department of Electrical and Electronic Engineering, Leading University, Sylhet, Bangladesh
  • Rupak Kanti Dhar Department of Electrical and Electronic Engineering, Leading University, Sylhet, Bangladesh

Palabras clave:

Cycloconverter, Frequency conversion, Firing Angle, Induction Motor, Harmonics.

Resumen

This paper presents the topology of direct conversion of AC-AC with step down frequency operation. Due to the higher order harmonics, AC conversion always faces difficulty and complex calculation, which affects the output response. Precise controlling and harmonics reduction is much easier using frequency control strategy. In this regards cycloconverter has drawn higher attention in terms of frequency conversion. In this paper, an approach for designing of single phase and three phase cycloconverter is reported. The gating sequence has been designed for desired frequency conversion. Again, the performance of the designed converters is evaluated using Matlab/Simulink software for different types of loads. The rotor speed of induction motor (IM) is observed here as a dynamic AC load. The complete description of the models for the frequency conversion is provided and simulation results for resistive, inductive and motor validate the developed strategy.   Keywords: Cycloconverter, frequency conversion, firing angle, induction motor, harmonicsCite this Article Jahid Khan Tuhin, Md. Foyez Ahmed, Tahmid Shahriar et al. Application of Non-Dominated Sorting Genetic Algorithm. Trends in Electrical Engineering. 2016; 6(3): 67–77p.

Descargas

Publicado

2016-12-26

Número

Vol. 6 Núm. 3 (2016)

Sección

Research Articles

Licencia

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.