Developing a Model in Matlab/Simulink Environment for Induction Motor Considering Core Loss and Stray Load Loss

Autores/as

  • Mohammad Abdul Mannan Department of Electrical and Electronic Engineering, American International University-Bangladesh, Kemal Ataturk Avenue, Banani, Dhaka-1213, Bangladesh
  • Rupak Kanti Dhar Department of Electrical and Electronic Engineering, American International University-Bangladesh, Kemal Ataturk Avenue, Banani, Dhaka-1213, Bangladesh
  • Md. Ehtashamul Haque Department of Electrical and Electronic Engineering, American International University-Bangladesh, Kemal Ataturk Avenue, Banani, Dhaka-1213, Bangladesh

Palabras clave:

Induction motor, Machine Modeling, Core loss, Stray Load, Field-oriented control, Vector control.

Resumen

This paper focuses on a Matlab/Simulink model of a squirrel-cage induction motor with consideration of core loss and stray load loss. This model is based on some mathematical expressions and also described through an equivalent circuit including core loss and stray load loss. The model of induction motor has been developed based on the state space equations in a synchronously rotating reference frame, where core loss and stray load losses were taken under consideration. The developed model allows testing the performance of an induction motor in different operating conditions and the performance of different designed control systems to control speed, flux and torque of an induction motor. The designed model has been tested for several operating conditions through the simulation in Matlab/Simulink environment.   Keywords: Induction motor, machine modeling, core loss, stray load, field-oriented control, vector control

Biografía del autor/a

  • Mohammad Abdul Mannan, Department of Electrical and Electronic Engineering, American International University-Bangladesh, Kemal Ataturk Avenue, Banani, Dhaka-1213, Bangladesh
  • Rupak Kanti Dhar, Department of Electrical and Electronic Engineering, American International University-Bangladesh, Kemal Ataturk Avenue, Banani, Dhaka-1213, Bangladesh
     
  • Md. Ehtashamul Haque, Department of Electrical and Electronic Engineering, American International University-Bangladesh, Kemal Ataturk Avenue, Banani, Dhaka-1213, Bangladesh

Descargas

Publicado

2014-07-23

Número

Vol. 4 Núm. 2 (2014)

Sección

Research Articles

Licencia

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.