Finding The Most Sensitive Nodes on IEEE-14 Bus System and Adaptation of Protection Scheme

Forfattere

  • M. S. Muhit Department of Electrical and Electronic Engineering, American International University-Bangladesh, Dhaka, Bangladesh
  • Raihan Miah Department of Electrical and Electronic Engineering, American International University-Bangladesh, Dhaka, Bangladesh
  • Rafiqul Islam Department of Electrical and Electronic Engineering, American International University-Bangladesh, Dhaka, Bangladesh
  • Osman Bin Ashraf Department of Electrical and Electronic Engineering, American International University-Bangladesh, Dhaka, Bangladesh

Nøgleord:

Matlab, PSAT, Reactive Load, Voltage Collapse, Sensitive Node.

Resumé

Power system stability is one of the most significant concerns in power system. Providing continuous supply of electric energy to meet the load demand is a complex technical challenge. One of the main causes of voltage instability in a system is the occurrence of reactive power imbalance in the system. Reactive power will be unbalanced when there is a sudden increase or decrease in reactive power demand in the system. For this reason, the system voltage is collapsed. One way to prevent the occurrence of voltage collapse is either to provide with an additional power supply of reactive power or reduce the reactive power load before the system reaches the point of voltage collapse. In order to get proper idea about power system stability, sensitivity analysis and critical line had been calculated. In this thesis, the simulation has executed through MATLAB. The reactive load has been increased upto 45% and at the conclusion stage, the most sensitive node has been analyzed. Specific protection scheme has been suggested too.   Keywords: PSAT, MATLAB, reactive load, voltage collapse, sensitive nodeCite this Article M.S. Muhit, Raihan Miah, Rafiqul Islam et al. Finding The Most Sensitive Nodes On IEEE-14 Bus System And Adaptation Of Protection Scheme. Trends in Electrical Engineering. 2016; 6(1): 50–56p.

Downloads

Publiceret

2016-04-20

Nummer

Årg. 6 Nr. 1 (2016)

Sektion

Research Articles

Licens

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.