HCC Based Hybrid Shunt Active Filter to Reduce the Harmonics Due to Switching Surges
Nøgleord:
Hysteresis Current Control [HCC], Active Power Filter [APF], Distributed Generators [DG], Distribution Systems [DS], shunt active filters, Voltage Regulation [VR], Total Harmonic Distortion [THD]Resumé
This paper deals with the hysteresis current control based hybrid shunt active filter to reduce the harmonics produced by frequent switching of industrial loads in distribution system. The main harmonic sources of distribution lines are the non linear loads and frequent switching of industrial loads. The harmonics due to non linear loads can be controlled by passive filters. The switching surges are dynamic and its magnitude dies out quickly. Hence the harmonics due to these phenomena requires an attention. The switching of loads produces voltage sag and swells which leads to harmonics in the lines. The proposed dampening system is fully characterized by series L, shunt C and shunt DC link connected through 3-phase active filter. The disturbances in the supply voltage and load current due to the switching surges are observed in the simulation. The same is studied after connecting the designed active filter to the line. The simulation results obtained from the proposed method proves that it gives comparatively better THD value.Downloads
Publiceret
Nummer
Sektion
Licens
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. _______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |