Modeling of Fuzzy Logic Controller for Photovoltaic Maximum Power Point Tracker

Forfattere

  • Ali M. Eltamaly Associate Professor,Electrical Engineering Department college of Engineering,King Saud University

Nøgleord:

Photovoltaic, fuzzy, modelling

Resumé

In this paper a fuzzy logic controller for maximum power point tracker of photovoltaic (PV) energy system is introduced. This controller uses a boost converter to control the terminal voltage of PV system to work at the maximum power point. The load side consists of battery and control switches to control the power flow from the PV system to the battery and the load. The system is modeled using Matlab/Simulink program. The output power from the PV system with the use of fuzzy controller is compared with the theoretical maximum power from the same system and the power output using the best constant output voltage. The fuzzy controller shows stable operation for different data introduced to the system. It also restrains any overshooting in input or output systems and increases the quantum of energy captured considerably.

Forfatterbiografi

  • Ali M. Eltamaly, Associate Professor,Electrical Engineering Department college of Engineering,King Saud University
    Associate Professor,Electrical Engineering Department college of Engineering,King Saud University office :2C20/2

Downloads

Publiceret

2012-01-23

Nummer

Årg. 1 Nr. 2 (2011)

Sektion

Research Articles

Licens

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.