Voltage and Power Quality Control in Wind Power Application by Dynamic Compensation
Klíčová slova:
Sag, STATCOMAbstrakt
Power quality problem is a critical problem in a power system. Most of the pollution problems created in power system is due to the nonlinear nature of loads. Due to large amount of non-linear equipment, impact and fluctuating loads (such as locomotive, arc-furnace, welding equipment, etc.); wind power as a rule, does not contribute to voltage regulation in grids. Also wind power very often is a source of voltage sag or swell. The power systems are often considered weak in that they possess relatively low short-circuit ratio, compared to a grid. Network voltage control becomes a challenging task as a result. The loads are also sensitive to short-duration disturbances in the form of voltage sags or swells. The use of STATCOM in improving voltage quality of isolating power systems is considered. The compensators are used to mitigate the effects of momentary voltage sags/swells.Keywords: Sag, STATCOM, Power qualityPublikováno
Číslo
Sekce
Licence
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. _______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |