Continuous Process Trickling Filter System with Perforated Spherical Celluloid Hexagonal Close-Packed System for the Removal of Pollutants in Domestic Wastewater

Autori

  • Joan Dolly Chung Zie Wei Universiti Malaysia Sarawak (UNIMAS)
  • Law Puong Ling

Parole chiave:

trickling filter, hexagonal close-packed, ammonia-nitrogen, nitrate-nitrogen

Abstract

Trickling filter system is an attached growth process which removes the pollutants from the wastewater via biological oxidation. In this research, the media is fabricated from perforated spherical celluloid in the arrangement of hexagonal close packed. The targeted compounds are specifically nitrogenous compounds, namely ammonia-nitrogen and nitrate-nitrogen, alongside biological oxygen demand and chemical oxygen demand. The percentage removal of the aforementioned parameters was found to be in the range of 55 and 97%. Comparing these to the performance of a conventional trickling filter system, the results are satisfactory. Keywords: trickling filter, hexagonal close-packed, ammonia-nitrogen, nitrate-nitrogen

Biografia autore

  • Joan Dolly Chung Zie Wei, Universiti Malaysia Sarawak (UNIMAS)
    PhD Candidate,Department of Civil Engineering,Faculty of Engineering,Universiti Malaysia Sarawak,Kuching, Malaysia.

Dowloads

Pubblicato

2013-07-29

Fascicolo

V. 3 N. 2 (2013)

Sezione

Research Articles

Licenza

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.