Compaction and Subgrade Characteristics of Clay Soil Modified with Beas Sand, Fly Ash, and Waste Ceramic

Autoři

  • R. K. Sharma Head, Materials and Metallurgical Engineering department, PEC University of Technology, Chandigarh, 160012 India
  • Tushar Khandelwal
  • Dikshit .

Klíčová slova:

soil, foundry sand, steel chips, MDD, OMC, CBR.

Abstrakt

The most concerning problem today with the thermal power plant is the disposal of fly ash. The use of fly ash as landfill causes great environmental pollution like groundwater contamination since coal contains trace levels of heavy metals. Similarly, waste ceramic too causes great environmental problem. So, there is a need to utilize these materials by exploiting their inherent properties to solve the environmental and disposable problem. This paper brings out the results of an experimental program carried out to evaluate the effectiveness of using fly ash with randomly distributed discrete waste ceramic for soil stabilization by studying the compaction and strength characteristics for use as a subgrade material. The influence of different mix proportions of clay, sand, fly ash and ceramic on compaction, drainage and CBR values has been studied. The results show that addition of fly ash increases the OMC and decreases the MDD, but increases the CBR. The designed composite may be used effectively for construction of subgrade, embankment and foundations of low-cost roads. Keywords: soil, foundry sand, steel chips, MDD, OMC, CBR

Biografie autora

  • R. K. Sharma, Head, Materials and Metallurgical Engineering department, PEC University of Technology, Chandigarh, 160012 India
    Heads Materials and Metallurgical Engineering department,PEC University of Technology. Member Editorial board, Indian Foundry Journal. Was meber Ed board, Powder Metallurgy, Quality International Journal from 1987 to 1993.Has innovated in Technical poetry, and authored elucidating Materials and Metallurgical Engineering processes and concepts.

Stažení

Publikováno

2013-07-29

Číslo

Vol 3 No 2 (2013)

Sekce

Research Articles

Licence

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.