Impact of Addition of Bagasse Ash on Production of Sesamum indicum and Soil Fertility
Resumen
In this present scenario, use of chemical based fertilizer have played an important role in improving and increasing the yield of crop, but also degrade and reduce the soil quality (physically and chemically). As an alternative of it, the waste from sugar industries can be used for the amendments in crop yield, soil physico-chemical characteristics and give an economically reasonable way to reuse these waste in an environmental friendly manner and to work out sustainable development. The current research work targeted the production of Sesamum indicum crop with the introduction of sugar industries bagasse Ash into it, with the different concentration @ 20%, 40%, 60%, 80% and 100% respectively in the pot having 2 kg soil, compared to the control sample by the pot experiment. The soil composition and characteristics, under investigation has shown a high pH (7.6 )value, low content of organic matter (8300 mg kg-1), and deficiency of N (336 mg kg-1), P (4.2 mg kg-1), Zn (5.9 mg kg-1) and Fe (5.3 mg kg-1). bagasse ash was highly rich in micronutrients like Fe, Mn, Zn and Cu and also constitute sufficient amount of K and P. Consequently, total porosity of soil, available P, K, Fe, Mn, Zn and Cu (48, 220, 38, 110, 41, 40 mg kg-1) content in soil, improved with the introduction of bagasse ash. On the other hand, dry bulk density reduced which is a positive effect. ECe and pH of the soil was increased in little amount. Thus, with the application of 20% of bagasse ash, the yield of Sesamum indicum crop the result can be enhanced to 40-60% due to the bagasse ash application. Keywords: Sesamum indicum, bagasse ash, soil quality, crop yieldCite this Article Kirti Prajapati, Gaurav Bhushan, Seema Dwivedi et al. Impact of Addition of Bagasse Ash on Production of Sesamum indicum and Soil Fertility. Omniscience: A Multi-disciplinary Journal. 2016; 6(2): 30–37p.Publicado
Número
Sección
Licencia
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
_______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |