Study on Various Faults, their Causes and Possible Remedies of Knitting and Finishing Sections of Composite Knit Industries in Bangladesh

Autores/as

  • Md. Suman Chowdhury
  • Md. Reaz uddin Repon
  • Md. Rakibul Islam
  • Amit Sarker
  • Md. Abdullah al Mamun Civil Engineer Manager (Project Operation Department) Vision Living Ltd.
  • Md. Abu Bakar Siddiquee

Palabras clave:

knitting faults, finishing faults, needle line, stenter machine, spirality

Resumen

The main aim of knitting and finishing sections of textile industries is to provide fault-free finished fabrics to the garment section. But the knitters and the finishers have to face a lot of problems for the fulfillment of this purpose. They have to face some problems, particularly, whose causes are mostly unknown to them. The aim of this paper was to investigate and find out the various faults of knitting and finishing sections of composite knit industries in Bangladesh that are encountered due to man, machine and other factors of processing and to identify the possible causes and remedies of these faults to save the precious raw materials, energy, cost, time, etc. Finally, it was observed that most of the knitting and finishing faults are attributed to the inferior yarn quality, improper machine parameters, faulty machine parts, and unskilled machine operators.

Descargas

Publicado

2013-04-05

Número

Vol. 3 Núm. 1 (2013)

Sección

Research Articles

Licencia

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

· I/We also agree to the authorship of the article in the following order:

Author’s name

1. ________________

2. ________________

3. ________________

_______________

We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.