Prediction of Weld Dilution Control by Advanced Gas Metal Arc Welding Process

著者

  • Pankajkumar J M Principal NRIITM
  • Sunil Pandey

キーワード:

Advanced GMAW、 dilution、 preheat current、 fractional factorial design、 dual power source.

要旨

  This work experimentally investigates the amount of reduction in Weld Dilution by using a comparatively new Advanced Gas Metal Arc Welding Process (AGMAW). The process represents GMAW process having a controllable pre-heating arrangement. The AGMAW process is used to break the fixed relationship between welding current and wire feed rate by using a separate power source, which preheats a certain section of wire (by I2R heating) before it emerges out of the welding torch. Dilution is the ratio of area of the base metal melted to the total area of weld bead measured across a given weld bead cross section. Dilution is one of the most important factors governing the success of any surfacing operation and is expressed in percentage Mathematical Model is developed using fractional factorial technique to predict the percentage Dilution. The response factor percentage Dilution as affected by wire feed rate, arc voltage, nozzle to plate distance, and welding speed with and without preheat current have been investigated and analyzed.  Keywords: Advanced GMAW, dilution, preheat current, fractional factorial design, dual power source.  

著者略歴

  • Pankajkumar J M、 Principal NRIITM
    Profedssor in Mechanical Engineering and PrincipalNRIITM

ダウンロード

発行日

2011-12-07

巻号

巻 1 号 2 (2011)

セクション

Research Articles

ライセンス

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.