Review of Sand Inclusion Defect Analysis to Initiate the Improvement in FNB Casting Process

Autor/innen

  • Shailee G. Acharya School of Engineering, R.K. University, Rajkot, Gujarat, India Department of Mechanical Engineering, Sardar Vallabhbhai Patel Institute of Technology, Vasad, Gujarat, India
  • Kartik Kothari Department of Mechanical Engineering, School of Engineering, R.K. University, Rajkot, Gujarat, India
  • Jeetendra A Vadher I/C Principal, Professor Mechanical Engineering, Government Engineering College,Palanpur, Gujarat,India

Schlagwörter:

Casting, defect, design of experiments, feed system, pouring velocity

Abstract

Sand inclusion is an important defect in grey cast iron castings. On an average, this defect accounts for 30 to 40% of the total number of defects arising in the foundries. Sand inclusion is undesirable since it ends up in reducing the strength of the castings and worsens the finish of the casting surface. Hundred or more parameters are responsible for sand inclusion defect and hence it is cumbersome and difficult to control the casting defect. A detailed literature review of the prior work, mostly on sand inclusion for the last 50 years or so, is done in this paper to find appropriate and adequate parameters for formation of defect i.e. sand inclusion. It was studied that exact and accurate remedies to eradicate sand inclusion was not easy. This paper describes the major defects occurring in resin bonded sand casting. Corrective action should be proposed and taken up on responsible parameters for improving the quality of ferrous castings and hence eliminate the sand inclusion defect. Cite this Article Acharya Shailee G, Kartik Kothari , Jeetendra A Vadher. Review of Sand Inclusion Defect Analysis to Initiate the Improvement in FNB Casting Process. Journal of Production Research and Management. 2016; 6(3): 19–25p

Autor/innen-Biografie

  • Kartik Kothari, Department of Mechanical Engineering, School of Engineering, R.K. University, Rajkot, Gujarat, India
    Professor, Mechanical Engineering Department

Downloads

Veröffentlicht

2016-12-12

Ausgabe

Bd. 6 Nr. 3 (2016)

Rubrik

Review Articles

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.