Thermal Analysis of Casting using ANSYS: A Review

Autor/innen

  • P. Lakum Department of Mechanical Engineering, CAD/CAM, A.I.T.S, Rajkot, Gujarat, India
  • R. D. Gondaliya Department of Mechanical Engineering, CAD/CAM, A.I.T.S, Rajkot, Gujarat, India
  • I. J. Jadeja Department of Mechanical Engineering, CAD/CAM, A.I.T.S, Rajkot, Gujarat

Schlagwörter:

ANSYS, casting, temperature distribution and thermal analysis, heat transfer coefficient

Abstract

The major requirement of any foundry is to provide the high quality casting products. Since the quality is depended upon thermal stress and solidification of the casting, a thermal analysis is a key area to work on. Heat transfer coefficient is the vital element of any thermal analysis. Mould and the casting interface is the most critical area that gets affected during the solidification. Heat transfer ratio at the inter face will give an explanation about temperature distribution and thermal stress analysis. ANSYS helps to understand the heat flow of casting. The moment when the molten metal solidifies is the most important instant and at that time transient thermal analysis is required to forecast the outcome of the casting solidification and to understand its behaviour. Cite this Article P. Lakum, R.D. Gondaliya, I.J. Jadeja Thermal Analysis of Casting using ANSYS: A Review. Journal of Production Research and Management. 2016; 6(1): 19–27p.

Downloads

Veröffentlicht

2016-05-04

Ausgabe

Bd. 6 Nr. 1 (2016)

Rubrik

Review Articles

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.