Influence of Welding Sequence on Distortion of Circumferential Pipe Joint: A Review

Autoři

  • Shubham Rupani Department of Mechanical Engineering, Atmiya Institute of Technology and Science, Rajkot, Gujarat, India
  • Anand Barai Department of Mechanical Engineering, Atmiya Institute of Technology and Science, Rajkot, Gujarat, India

Klíčová slova:

Welding sequence, welding distortion, pipe welding, circumferential pipe joint

Abstrakt

Welding of pipes and pressure vessels is a very critical operation for the chemical industries and power plants. It requires considerable experience to develop a proper sequence for welding a circumferential pipe joint. This review paper presents the analysis of different weld sequences and its effect on distortion and stresses in pipe joint. In this paper, experimental results are illustrated for AISI stainless steel pipe joint having diameter 274 mm and thickness 6.2 mm, which is TIG welded with V groove geometry.Cite this Article Shubham Rupani, Anand Barai. Influence of Welding Sequence on Distortion of Circumferential Pipe Joint: A Review. Journal of Production Research and Management. 2016; 6(1): 39–43p.

Stažení

Publikováno

2016-05-02

Číslo

Vol 6 No 1 (2016)

Sekce

Review Articles

Licence

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.