The Time and Frequency Response of Shielded Transformer Windings
Klíčová slova:
Power transformers, equivalent circuit, power system transients, transformer winding, shielding, distributed parameters, initial voltage distribution, high-frequency model, frequency response, resonanceAbstrakt
A distributed-parameter model is presented for the transient and frequency analysis of power transformers’ windings in the presence of electrostatic shielding, a technique occasionally applied for improving their initial voltage distribution. The s-domain solution takes into account the windings’ circuit parameters with special emphasis on the additional distributed capacitances between the windings’ conductors and the conducting shield which is connected to the windings’ line terminal. The closeness of the resulting initial voltage profile to the ideal case of uniform distribution is suggested as a criterion for assessing the achieved improvement in the windings’ voltage stresses. This leads to the determination of the optimal shielding arrangement. The sensitivity of the modified initial and transient responses to step and double-exponential voltage stimuli is investigated. Moreover, the resulting change in the windings’ series and parallel resonance frequencies is also addressed. Keywords: Power transformers, equivalent circuit, power system transients, transformer winding, shielding, distributed parameters, initial voltage distribution, high-frequency model, frequency response, resonance.Publikováno
Číslo
Sekce
Licence
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. _______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |