Thermal-hydraulic Safety Assessment of a Miniature Neutron Source Reactor

Авторы

  • E. Rita Appiah National Nuclear Research Institute, Ghana Atomic Energy Commission P. O. Box LG 80, Legon, Accra, Ghana
  • E. H.K Akaho Graduate School of Nuclear and Allied Sciences, University of Ghana, Legon, P. O. Box AE1, Accra, Ghana
  • Nana Ayensu Gyeabour Graduate School of Nuclear and Allied Sciences, University of Ghana, Legon, P. O. Box AE1, Accra, Ghana

Ключевые слова:

Thermal hydraulics, safety assessment, fuel rod, mcnp x, uranium 235, PLTEMP /ANL v 4.0 code, natural convection

Аннотация

The main objective of this study is to assess the thermal-hydraulic safety capability of the PLTEMP/ANL v 4.0 in analyzing Ghana Research Reactor-1 (GHARR-1), with vertical fuel rods cooled by natural convection, operating at a nominal power (30 kW) with sufficient safety margins. The neutronic analysis of the core was performed using MCNP X code, where parameters of interest were the power distributions and the power peaking factors. The thermal-hydraulic model of the Ghana Research Reactor-1 core was simulated using the PLTEMP/ANL v 4.0 code designed for steady-state axial nodal analysis. The thermal-hydraulics axial properties of all 344 fuel rod bundled together with the individual lattice positions in the reactor core have been modeled. Applying the concept of hot channel factors, ring A was determined to be the hottest region in the core containing the hottest fuel rod and coolant channel. Also, the hot spot location on each fuel rod was observed to occur on the axial node twelve (12) for all fuel rods with each fuel rod having twenty-one axial nodes. The main thermal-hydraulic safety margins of the core have been evaluated. The outcome of this work certifies that GHARR-1 can be operated at steady state without compromising on safety.Keywords:  Thermal hydraulics, safety assessment, fuel rod, mcnp x, uranium 235, PLTEMP /ANL v 4.0 code, natural convection

Биография автора

  • E. Rita Appiah, National Nuclear Research Institute, Ghana Atomic Energy Commission P. O. Box LG 80, Legon, Accra, Ghana
    National Nuclear Research InstituteAssistant Research Scientist

Загрузки

Опубликован

2013-12-16

Выпуск

Том 3 № 3 (2013)

Раздел

Research Papers

Лицензия

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.