PBE-based Drop Dynamics Simulation in an Unbaffled Stirred Tank Reactor

著者

  • S. Somasundaram IGCAR
  • Shekhar Kumar IGCAR
  • V. Vijayakumar IGCAR

キーワード:

PBE、 drop size、 solvent extraction

要旨

The population balance equation (PBE)-based model describes the distribution of drop size with respective to its size. In this work, 30% TBP was dispersed in 4N nitric acid solution by turbine impeller. Drop-size distributions were measured with a 630 nm laser-based particle size analyzer. For daughter drop density function, a normal distribution function was considered. For breakage rate, Voigt model of Chen et al. was used in the simulation [1]. For coalescence, model of Coulaloglou and Tavlarides was used [2]. The population balance equation was solved and simulation results were compared with experimental results. It was observed that the breakage model of Chen et al. could reproduce the experimental results with good accuracy [1]. In this paper, detailed results of these investigations would be presented.  Keywords: Solvent extraction, population balance, drop-size distribution, modeling, mass transfer Cite this Article Somasundaram S, Kumar S, Vijayakumar V. PBE-Based Drop Dynamics Simulation in an Unbaffled Stirred Tank Reactor. Journal of Nuclear Engineering and Technology. 2016; 6(1): 25–35p.

著者略歴

  • S. Somasundaram、 IGCAR
    Shift engineer , RpG, IGCAR

ダウンロード

発行日

2016-04-04

巻号

巻 6 号 1 (2016)

セクション

Research Papers

ライセンス

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.