Pressure Swing Adsorption Process for Reduction of Argon-41 Release from Nuclear Reactor Exhaust Systems

Autoři

  • Pradip Kumar Nuclear Recycle Board Kalpakkam, BARC
  • M. Cheralathan Centralised Waste Management Facilty, Nuclear Recycle Board, Kalpakkam
  • S. Sathish Chemical Engineering Department, Sathyabama University, Chennai

Klíčová slova:

Argon-41, MS 5A, CMS, PSA, gamma activity

Abstrakt

In several nuclear reactors, huge quantity of air (in the order of 10,000 cmh) is continuously passed to cool the calandria vault. This results in high radiation field due to argon-41. It is necessary to isolate and recover argon from these environments, which can bring down the activity release to the atmosphere in attaining ALARA principle. Pressure swing adsorption (PSA) technique has been employed by combining molecular sieves 5A (MS5A) and carbon molecular sieves (CMS) beds in series for the separation of argon from air. The analysis and results of varying certain parameters for optimization of argon purity and recovery have been studied. This paper includes theoretically calculated values on the activity of argon-41 obtained during the above experiments. The results of the same are discussed by considering the condition that exhaust streams of reactor containment building (RB) of a typical atomic power station are being fed to the system. From the studies carried out, it is found that using MS 5A PSA system the average argon-41 release 40 Bq/ml can be reduced to 13.6 Bq/ml with volume reduction factors in the order of ten. If combined system is employed, then the argon release can be reduced to 24 Bq/ml with a volume reduction factors in the order of 60.Keywords: Argon-41, MS 5A, CMS, PSA, gamma activityCite this Article: Pradip Kumar, M. Cheralathan, S. Sathish. Pressure Swing Adsorption Process for Reduction of Argon-41 Release from Nuclear Reactor Exhaust Systems. Journal of Nuclear Engineering & Technology. 2015; 5(1): 25-28p. 

Biografie autora

  • S. Sathish, Chemical Engineering Department, Sathyabama University, Chennai
    Assistant Professor

Stažení

Publikováno

2015-04-23

Číslo

Vol 5 No 1 (2015)

Sekce

Research Papers

Licence

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.