Evaluation of Optimal Parameters for Wire EDM Machine on En45A Alloy Steel using Taguchi and Grey Relational Analysis (GRA) Method

Autoři

  • Anil Kumar Dhakad Department of Mechanical Engineering, Madhav Institute of Technology & Science, Gwalior, MP, India
  • Jyoti Vimal Department of Mechanical Engineering, Madhav Institute of Technology & Science, Gwalior, MP, India

Klíčová slova:

Wire electrical discharging machining (WEDM), Taguchi method, orthogonal array, signal-to-noise (S/N Ratio), grey relational analysis, MRR, optimization of multiple process parameters, surface roughness, En45A alloy steel

Abstrakt

The core goal of this research paper is to evaluate process parameters of wire electrical discharging machining and to find out the best parameter among the multiple responses given by machine. Wire cut machine is very accurate and precise machine which is actually manufactured to cut those material which have high strength, toughness, and hardness. This machine works on melting property; here spark is generated between the work piece and the cutting wire which creates high temperature to perform cutting operation. Material removal rate (MRR) and machining time (MT) are to be found for the machining of En45A alloy steel material or En45A silicone manganese spring steel. Cite this Article Anil Kumar Dhakad, Jyoti Vimal. Evaluation of Optimal Parameters for Wire EDM Machine on En45A Alloy Steel using Taguchi and Grey Relational Analysis (GRA) Method..Journal of Materials & Metallurgical Engineering. 2016; 6(1): 11–21p.

Stažení

Publikováno

2016-03-18

Číslo

Vol 6 No 1 (2016)

Sekce

Research Articles

Licence

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.