Optimization of Process Parameters of Two Way Abrasive Flow Machining by Grey Relational Analysis Coupled with Principle Component Analysis

Autori

  • Amit Sharma Department of Mechanical Engineering, Madhav Institute of Technology & Science, Gwalior, India
  • Vedansh Chaturvedi Department of Mechanical Engineering, Madhav Institute of Technology & Science, Gwalior, India
  • M. K. Gaur Department of Mechanical Engineering, Madhav Institute of Technology & Science, Gwalior, India

Parole chiave:

AFM, AFM media, brass, Grey relational analysis, Principle component analysis

Abstract

Now a days as the advancement of technology is increasing rapidly, expectation of human, from industry also increased. To fulfil these expectations new technologies are coming into existence. In this regard unconventional machining processes are playing an important role. Abrasive flow machining is a non-traditional finishing process used for finishing parts with predominantly irregular geometry. In AFM, material removal and surface finish takes place by flowing visco elastic abrasive carrier across the surface to be machined. The media (carrier+abrasive) is the key element in the process because of its ability to precisely abrade the selected area along its flow path. In this study an attempt is made to develop an optimum level of process parameters by using grey relational analysis coupled with principle component analysis. A work piece made of brass having inner diameter 7.7 mm, outer diameter 10 mm and length 17.2 mm is machined in this experimental work. Result shows the effect of various input parameters on material removal rate, surface roughness and find out a set of parametric combination which is optimum.Keywords: AFM, AFM media, brass, Grey relational analysis, Principle component analysis Cite this Article Amit Sharma, Vedansh Chaturvedi, Gaur MK. Optimization of Process Parameters of Two Way Abrasive Flow Machining by Grey Relational Analysis Coupled with Principle Component Analysis. Journal of Experimental & Applied Mechanics. 2015; 6(2): 44–56p.

Biografia autore

  • Amit Sharma, Department of Mechanical Engineering, Madhav Institute of Technology & Science, Gwalior, India
    Student at madhav institute of technology & science, gwalior

Dowloads

Pubblicato

2015-06-23

Fascicolo

V. 6 N. 2 (2015)

Sezione

Research Articles

Licenza

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.