Precise Modeling Practice for Avionics PCB in Random Vibration Environment

著者

  • K. Jagadisan Research Centre Imarat (RCI)-DRDO, National Institute of Technology (NIT)-Warangal, Warangal, Telangana, India
  • P. Bangaru Babu Research Centre Imarat (RCI)-DRDO, National Institute of Technology (NIT)-Warangal, Warangal, Telangana, India
  • P. Anil Kumar Research Centre Imarat (RCI)-DRDO, National Institute of Technology (NIT)-Warangal, Warangal, Telangana, India

キーワード:

Electronic packaging、 finite element analysis of PCB、 PCB boundary conditions

要旨

Electronic packaging analysis fraternity makes use of finite element method (FEM) to predict random vibration response experienced by printed circuit board (PCB) of any avionics electronic package. Degree of accuracy associated with such prediction enables the connoisseur to make apt verdict while ascertaining the design adequacy of the package. Achieving accuracy in prediction is dictated by the preciseness associated with the modeling practices adopted in FEM. Precision of a particular FE model in turn is influenced by proper consideration of material properties and boundary conditions. An attempt has been made to address these two major challenges in the present research work. Conventional means have been adopted to extract material properties. However a novel approach has been evolved to extract shear modulus of PCB. Rotational spring element has been used to simulate rotational degrees of freedom (DOF) of PCB. Rotational stiffness which needs to be keyed in as input for FE model has been extracted with the aid of experimentation. Further a database has been established consisting of rotational stiffness and damping values for various mounting configurations of PCB which are validated with experiments as well. By integrating these two key parameters with experimentally evaluated material properties, a precise modeling practice for PCB has been devised, methodically validated with that of experimentation and its consistency has been established. Any electronic packaging designer can make use of this precise modeling practice for evaluating the design adequacy of PCB in random vibration environment with finer degree of accuracy.Cite this ArticleJagadisan K, Bangaru Babu P, Anil Kumar P. Precise Modeling Practice for Avionics PCB in Random Vibration Environment. Journal of Experimental & Applied Mechanics. 2016; 7(1): 51–59p.

著者略歴

  • K. Jagadisan、 Research Centre Imarat (RCI)-DRDO, National Institute of Technology (NIT)-Warangal, Warangal, Telangana, India
    Scientist 'H',Project Director, Research Centre Imarat (RCI)- Defence Research Development Organisation (DRDO); Hyderabad; Telangana; India.
  • P. Bangaru Babu、 Research Centre Imarat (RCI)-DRDO, National Institute of Technology (NIT)-Warangal, Warangal, Telangana, India
    Professor; Department of Mechanical Engineering; National Institute of Technology (NIT); Warangal; Telangana; India.
  • P. Anil Kumar、 Research Centre Imarat (RCI)-DRDO, National Institute of Technology (NIT)-Warangal, Warangal, Telangana, India
    Scientist 'E', Head-SDAT & COCOA, ENTEST, Research Centre Imarat (RCI)- Defence Research Development Organisation (DRDO), Hyderabad; Telangana; India.

ダウンロード

発行日

2016-04-25

巻号

巻 7 号 1 (2016)

セクション

Research Articles

ライセンス

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.