Automated Pick and Place Mechanism in Industry using Robotic Arm

Авторы

  • Vallari S. Ansingkar Department of Electronics and Telecommunications, Sinhgad College of Engineering, Pune, Maharashtra, India
  • Vrushali G. Raut Department of Electronics and Telecommunications, Sinhgad College of Engineering, Pune, Maharashtra, India

Аннотация

Many industries in India were found to be using manual methods for material transfer and pick and place of products. This reduces the productivity and causes unnecessary time consumption. This project is for automating the action of pick and place of material. Before an object is dispatched to the market or another company, there is a lot of movement of the object which is under manufacturing. All the hardwiring involved in machines has now been reduced due to PLC (Programmable logic controller). Greatest advantage of PLC is that logic of the machine can be altered without doing many changes on the electrical side. HMI (Human Machine Interface) is used in the system to start the operation or stop it. There are sensors to sense object. The object sensed will be indicated to PLC. Program in PLC will pick the object from the conveyor belt and bring it to predefined location using robotic arm.   Keywords: Automation, PLC, robotics, human machine interfaceCite this Article Vallari S. Ansingkar, Vrushali G. Raut. Automated Pick and Place Mechanism in Industry using Robotic Arm. Journal of Control & Instrumentation. 2017; 8(2): 9–14p.

Загрузки

Опубликован

2017-08-25

Выпуск

Том 8 № 2 (2017)

Раздел

Research Articles

Лицензия

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.