RFID BASED PROTOTYPE DEVELOPMENT OF IMMOBILIZER FOR TWO WHEELER VEHICLE SECURITY

Autoři

  • Sandeep Kumar
  • Asutosh Sevak
  • Abhishek Shukla
  • Shashank Pujari

Klíčová slova:

RFID, Immobilizer, UID, Vehicle Security

Abstrakt

An immobilizer is an electronic device fitted to an automobile which prevents the engine from running unless the vehicle has the proper access to it. The main use of this system is to protect the vehicle from being stealth as it deactivates the engine. The immobilizer security system is mainly seen in four wheeler vehicles. The same idea can be implemented for 2 wheeler vehicles which are in huge number in countries like India and Japan, as the vehicles are being stolen very frequently. Early models of immobiliser used a static code in the ignition key itself in place of a remote RFID tag, which was recognized by an RFID loop around the lock barrel and checked against the vehicle's Engine Control Unit (ECU) for a match. If the code is unrecognised, the ECU will not allow fuel to flow and ignition to take place. When the ECU determines that the coded key is valid then the ECU activates the fuel-injection sequence. The aim of this paper is to develop a prototype for immobilizing the vehicle with the help of RFID. The tag should be in the pocket of the vehicle owner, when the tag comes into the EMF field which is surrounded around the bike. The ID present in the tag has to be read by the reader and compare the id present in the controller. If the ID gets matched then the ignition will turn on or else not. The owner will be having only one ID. In any case if some other tries to start the bike by using other tag having different ID it will not work and the bike will not get started. This unique feature of the prototype adds more security for two wheeler vehicles. Keywords: RFID, Immobilizer, UID, Vehicle Security

Stažení

Publikováno

2010-11-11

Číslo

Vol 1 No 1 (2010)

Sekce

Research Articles

Licence

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.