|
Issue |
Title |
|
Vol 5, No 3 (2015) |
Review on Evaluation Techniques Such as DOE and ANN Used for Evaluate Heat Flow Parameters for Resistance Spot Welding |
Abstract
|
Hardik Hindocha Piyushkumar, GD Acharya |
|
Vol 2, No 2 (2012) |
Selection of the Best Statistical Distribution with Multicriteria Decision Making Technique TOPSIS |
Abstract
|
Asis Sarkar, Dr. Bijan Sarkar, Dr. Subhash Chandra Panja, E. Suresh Kumar, D. K. Behra |
|
Vol 5, No 1 (2015) |
SHEQ to Shake the Car Development for Tomorrow Part-I |
Abstract
|
Priyavrat Thareja |
|
Vol 6, No 1 (2016) |
SHEQ to Shake the Car Development for Tomorrow: Part II (Infrastructural Shortfall and Growth @ Future-Cars) |
Abstract
|
Priyavrat Thareja |
|
Vol 1, No 1 (2011) |
SIMULATION OF COLD DIE COMPACTION ALUMINA POWDER |
Abstract
|
Mohammed jasim kadhim |
|
Vol 6, No 1 (2016) |
Solar Humidity Control Unit with Hot Water Generation |
Abstract
|
Swadesh Pratap Singh, Anil Singh Tomar, Sachindra Singh, C S Malvi |
|
Vol 7, No 1 (2017) |
Static and Dynamic Balancing of Rotating Machineries in The Field: A Review |
Abstract
|
Konal I. Singh, Saket Kolhe, Amit R. Bhende |
|
Vol 4, No 3 (2014) |
Stress Analysis of Pressurized Thick Truncated Conical Shells with varying Modulus of Elasticity as Power Function |
Abstract
|
P. Aravinda Sai Murthy, N. D. Mittal |
|
Vol 2, No 1 (2012) |
Structural Influence on Velocity and Acceleration Characteristics of Closed Kinematic Chains and Inversions |
Abstract
|
A. Jagadeesh, A. Srinath, M. Srinivasa Reddy, K. Mallikarjuna Rao |
|
Vol 6, No 2 (2016) |
Structural Vigor Comparison of a CNG Cylinder with Different Material Cull |
Abstract
|
Suraj Singh |
|
Vol 3, No 2 (2013) |
Surface Modification by Electro-discharge Coating and Its Characterisation |
Abstract
|
R. S. Pawar, S.B. Sharma |
|
Vol 3, No 2 (2013) |
Sustaining Competitiveness Though Innovation |
Abstract
|
Priyavrat Thareja |
|
Vol 2, No 2 (2012) |
Tensile Behavior of Aluminum–Cenosphere Metal Matrix Composite by Stir-Casting Route |
Abstract
|
Saravanan Varatharaju, A. Shanmugasundaram, Dr. P. R. Thyla |
|
Vol 4, No 1 (2014) |
The Study of Hole Flanging Process of Advanced High Strength Steel |
Abstract
|
Pankaj Shrivastava, S. K. Panthi |
|
Vol 1, No 1 (2011) |
THERMODYNAMIC SIMULATION OF PERFORMANCE OF ATKINSON CYCLE WITH VARIATION OF CYCLE PEAK TEMPERATURE & SPECIFIC HEAT RATIO OF WORKING FLUID |
Abstract
|
Mohd nadeem khan |
|
Vol 6, No 2 (2016) |
Thermo-Mechanical Analysis of Aluminium and Mild Steel during Friction Drilling |
Abstract
|
R. N. Todkar, S. R. Londhe, R. R. Ligade, S. G. Varpe |
|
Vol 7, No 2 (2017) |
Ultrasonic Pulse Echo Inspection in Resistance Spot Welding for Stainless Steel SS304 |
Abstract
|
Hardik P. Hindocha |
|
Vol 5, No 1 (2015) |
Use of Fuzzy Logic Method for the Optimisation of the Wear Parameters of Aluminum Alloy |
Abstract
|
H. P. Varade, K. C. Bhosale, S. R. Thorat, P. W. Ingle |
|
101 - 118 of 118 Items |
<< < 1 2 3 4 5 |