|
Issue |
Title |
|
Vol 4, No 2 (2014) |
Correlating the Damage Behaviour of Polymer Composites with the Potential Energy of the Impactor |
Abstract
|
K Mohamed Kaleemulla, K.G. Satish |
|
Vol 2, No 1 (2012) |
Corrosion Behaviour of Ferritic Steel, Austenitic Steel and Low Carbon Steel Grades in Sugarcane Juice |
Abstract
|
Sunil B Wesley, Hari Sharan Goyal, Subhash C Mishra |
|
Vol 4, No 1 (2014) |
Critical Review of Fatigue Properties of Friction Stir Welds of Aluminum Alloys |
Abstract
|
Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao |
|
Vol 6, No 1 (2016) |
Current Status of Thermal Spray Coatings for High Temperature Corrosion Resistance of Boiler Steel |
Abstract
|
Khushdeep Goyal, Hazoor Singh, Rakesh Bhatia |
|
Vol 2, No 1 (2012) |
Dependence of Adhesion Strength of Plasma Spray on Coating Surface Properties |
Abstract
|
Ajit Behera, S .C. Mishra |
|
Vol 7, No 1 (2017) |
Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite for Cylinder Liner |
Abstract
|
Mrinalini Sudhakar Rasal, Prashant A. Narawade |
|
Vol 2, No 1 (2012) |
Development of New Castable Al-Alloy-TiB2 Metal Matrix Composites |
Abstract
|
Vijay Marotrao Nimbalkar, B.R.K. Rao, V.P. Deshmukh, K.V. Marathe, N. Eswara Prasad |
|
Vol 5, No 2 (2015) |
Drilling of Composite Materials: A Review |
Abstract
|
T. Vijay Krishna Kanth, V. Sai Srikanth |
|
Vol 7, No 2 (2017) |
Dry Sliding Wear Behavior of Al2O3-TiO2 Coated Ti6Al4V Alloy based on Taguchi Method |
Abstract
|
M. Raja Roy, Ramanaiah N, Sundara Siva Rao B.S.K. |
|
Vol 2, No 2 (2012) |
Eco-friendly Corrosion Inhibitors for N80 Steel in Hydrochloric Acid |
Abstract
|
M. Yadav, Usha Sharma |
|
Vol 3, No 1 (2013) |
Effect of Alloying Elements and Processing Parameters on Mechanical Properties of Austempered Ductile Iron |
Abstract
|
Amar Kumar Das, Jyoti Prakash Dhal, Ranjit Kumar Panda, S. C. Mishra, S. Sen |
|
Vol 5, No 2 (2015) |
Effect of Boric Acid Addition on Tensile Test Properties of Fiber Glass |
Abstract
|
Basim Ajel Sadkhan |
|
Vol 2, No 2 (2012) |
Effect of Chemical Treatment of Coir Dust on the Dielectric Behavior of Bio-waste Reinforced Polymer Composites |
Abstract
|
Aireddy Harinath Reddy, S. C. Mishra |
|
Vol 6, No 2 (2016) |
Effect of Cryogenic Treatment on Wear Characteristics of T42 High Speed Steel |
Abstract
|
Ashish G Bandewar, Milind B. Surve, Mayuresh P. Joshi, Aniket Akhade |
|
Vol 2, No 2 (2012) |
Effect of Hot Induction Process on Bend Properties |
Abstract
|
Rajeev Sharma, J.Raghu Shant, Bijay K. Pandey, Rajesh K. Goyal, T. S. Kathayat |
|
Vol 5, No 3 (2015) |
Effect of Isothermal Ageing on Microstructure and Mechanical Behavior of 0.5Cr-0.5Mo-0.2V Low Alloy Steel |
Abstract
|
Ranjana Kumari, Goutam Das |
|
Vol 5, No 2 (2015) |
Effect of Mixing Time on Mechanical Properties of Epoxy-Fly Ash Composite |
Abstract
|
Ashutosh Pattanaik, Manoja Kumar Mohanty, Mantra Prasad Sathpathy, Subash Chandra Mishra |
|
Vol 6, No 3 (2016) |
Effect of Pin Profile on Micro Structure and Mechanical Properties of Friction Stir Welded AZ31B Magnesium Alloy |
Abstract
|
Piyush Gulati, Dinesh Kumar Shukla |
|
Vol 2, No 1 (2012) |
Effect of Process Parameters of Pulsed Current Micro Plasma Arc Welding on Weld Pool Geometry of AISI 304L Stainless Steel Sheets |
Abstract
|
Siva Prasad Kondapalli, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao |
|
Vol 7, No 2 (2017) |
Effect of Process Parameters on Material Removal Rate of Wire-Cut EDM of AISI EN 31 Tool Steel |
Abstract
|
Nimratjot Singh, Khushdeep Goyal, Rakesh Bhatia |
|
Vol 6, No 3 (2016) |
Effect of Pulse Current Micro Plasma Arc Welding Parameters on Pitting Corrosion Rate of AISI 316Ti Sheets in 3.5 N NaCl Medium |
Abstract
|
Kondapalli Siva Prasad |
|
Vol 2, No 3 (2012) |
Effect of Surface Pore Filling and Adhesive Joining on Energy Absorption of Closed Cell Aluminum Foam |
Abstract
|
Vipin Kumar, B. S. S. Daniel |
|
Vol 4, No 2 (2014) |
Effect of Tool Tilt on Formation of Tunnel in Friction Stir Welded 5083 Joints: An Experimental Study |
Abstract
|
S.K. Tiwari, D.K. Shukla, Rakesh Chandra |
|
Vol 1, No 3 (2011) |
Establishing Empirical Relationships to Predict Grain Size and Hardness of Pulsed Current Microplasma Arc Welded Inconel 625 Sheets |
Abstract
|
Siva Prasad Kondapalli, Srinivasa Rao Chalamalasetti, Nageswara Rao Damera |
|
Vol 4, No 2 (2014) |
Evaluation of Mechanical Property and Optimization of the Dry Sliding Wear Behavior of Carbon Black-Alumina-Epoxy-Glass Composite by using Design of Experiments |
Abstract
|
Amith V., Sudrashan Rao, Sushilendra Mutalikdesai |
|
26 - 50 of 117 Items |
<< < 1 2 3 4 5 > >> |